Gas Piston Vs. Direct Impingement AR-15s
Gas pistons and direct impingement Ar-15s may seem like a small thing to have to decide between, but it can make a significant difference in your ability to protect yourself with your AR-15. If you haven’t decided which type is best for you, you must first understand the similarities and the differences between them.
With an understanding of gas piston and direct impingement, you will be able to make an informed decision. It all comes down to personal choice, so let us look at each of them.
Gas pistons are popular among those who participate in fast-paced competitions like the 3-gun competition. This is because gas pistons tend to run more smoothly and at a cooler temperature than direct impingements.
You can purchase an AR-15 with the gas piston already installed, or you can purchase a piston-enabled upper receiver or a conversion kit. There are a couple of reasons why you may choose to switch to a gas piston.
There is no Gas Blowback into The Breech.
Everything that blows out of your upper will eventually end up in your lower receiver. This will cause you to have dirtier firearm than needed. It could also eventually affect your firing power if you do not thoroughly clean it.
Cleaning your firearm is easier in a gas piston AR. A gas piston AR-15 funnels all gas and powder fouling into a contained area, the face of the piston.
Heat Displacement
If you are shooting competitively, you may want to switch to a gas piston to help keep your weapon slightly cooler. This happens because the hot gases are contained to one spot instead of being pushed around to different areas.
Now, if you choose to use a gas piston, there are also downsides to them. They are extremely expensive. Many gas piston receivers alone come in at the same price as a fully kitted direct impingement AR-15.
If you are planning to participate in various competitions and are going to be able to make up the money you spend on a gas piston, you may be making a great decision.
Gas pistons would save you time in cleaning your weapon. It could keep it from getting too hot to handle during competitions. Additionally, it may help you to win money through those competitions.
The original technology used for an AR-15 is the direct impingement system. Through this, propellant gas goes through a hole in the barrel, then through a small tube to make direct contact with the bolt carrier mechanism.
Once this happens, the gas is pushed to the rear of the rifle and the casing is extracted then ejected. The spring-loaded action of an AR-15 strips an unspent round from the cartridge and loads it into the chamber, making you ready to fire again.
All these actions put together can create a dirtier firearm than that of a gas piston. However, it does not occur as quickly as proponents of the gas piston would have you think. Direct impingement AR-15s can fire up to about 2,000 rounds before malfunctioning from lack of cleanliness.
There are a few reasons you may choose a direct impingement over a gas piston.
DI AR-15s Are Reliable
There is a reason the direct impingement is still around. It is quite reliable and has proven itself over the years. With it having been the original technology for the AR-15, there have been countless opportunities to build upon it and to tweak small imbalances or nuisances as they occur.
Everyone who has shot an AR-15 has at some point used a direct impingement, and you will be able to talk with different marksmen about the pros, cons, tips, and tricks involved in competing with a direct impingement AR-15. The fact that they have been around for so long can work in your favor.
Direct Impingement Is Inexpensive
Since they have been around for such a long time, the direct impingement attachments are inexpensive and easy to obtain. If something malfunctions, it is easy to either find someone who can fix the problem or to find a proper replacement part.
Direct impingements Rifles are a good choice for self defense. As they have been proven as reliable through time and the parts are easy to replace. The ability to purchase and replace parts is important when thinking about those who are in armies and fight wars, as they must have the weapons in tip-top condition to keep themselves and others safe.
As far as accuracy goes, there is not much of a difference between gas piston and direct impingement systems. Both systems shoot reliably, and one does not malfunction more than the other. The direct impingement system is more lightweight and versatile, while the gas piston keeps the weapon cooler and is easier to clean.
If you are someone who does not like to meticulously clean your weapon, a gas piston AR-15 may be the best choice for you. However, if you are someone who wants to have access to replacement parts no matter where you are in the world, a direct impingement may be up your alley.
Having a gas piston may cool off your weapon and make it easier to compete. However, it is is not as reliable if it is being used in a shortened barrel. This can lead to your rifle jamming in the heat of the moment. If you are using a non-standard AR, the best choice will be a direct impingement.
In this case, the direct impingements are more reliable and will be less likely to jam on you.
Conclusion
No matter what choice you make, it all comes down to preference. Each one will do the ultimate job of firing the ammunition and neutralizing the target. Each has its own pros and cons, but each is very well created and easy to maintain. Have fun trying them out!
